When the washing machine stops spinning clothes after washing, it is easy to notice: the laundry is soaked with water, which drips onto the floor. Of course, this situation causes a lot of inconvenience and requires correction. You can get more information about this on https://mannyappliances.com/ before asking for help from professionals.
What can you do yourself
Before calling a technician to repair the machine, it is worth performing a number of simple steps:
- First of all, you should carefully check the settings of the running washing program. Perhaps the washing mode without spinning or spinning at the lowest speed was accidentally selected. In both cases, the laundry will remain wet. It is very easy to fix this error, just run the spin program separately from the main one.
- If the reason is not in the program settings, you should make sure that the drain is not clogged. After all, the machine will not be able to turn on the spin until all the water from the tank has been drained. If something prevents the water from draining, the spin will not start, and the laundry will remain wet. The cause of the blockage are various small objects that get into the filter, clogging it. These can be hairpins, keys, coins, cufflinks, pens and other small items. If it turns out that the drain does not work, you will need to disassemble the filter and clean it of foreign particles. Read more about this on mannyappliances.com.
- Another possible reason for the lack of spinning is the creation of a strong imbalance caused by the presence of a very heavy large item in the drum, for example, a blanket. When trying to spin, the machine knocks loudly and jumps. In this situation, you need to stop the wash and remove the heavy item from the drum. After this, you should try to start the washing program again.
Contacting professionals
If all options for self-elimination of the malfunction have been exhausted, but the problem remains unresolved, you need to contact specialists in washing machine repair. You can learn more about the features of the repair on mannyappliances. Repair is necessary in the following situations:
- The drain system is clogged. If the blockage is localized not in the filter, but in another part of the drain system, only a specialist can fix the malfunction.
- A broken drain pump means that water does not drain from the tank and the spin cycle does not start. In this case, it is necessary to replace the faulty pump.
- If the liquid level sensor in the tank fails, the control board stops receiving the information needed to start the spin cycle. Replacing the pressure switch, which is done by professionals, will help solve the problem.
- If the drive belt is very worn, it slips and does not allow the machine to gain high speed during the spin cycle. Replacing the belt will help solve this problem.